EVERBLOCK FLOORING SNAPS TOGETHER EASILY FOR QUICK INSTALLATION AND REMOVAL

​

EverBlock exhibit flooring sections can be deployed for any sized trade show booth. From small 10x10 booths to larger 40x60 booths, EverBlock connects quickly and installs easily over carpet, concrete, and other typical convention center surfaces.  EverBlock trade show flooring can also be used outdoors and over grass, gravel, sand, and even mud. 

​

EverBlock exhibit flooring transports in up to 3ft x 4ft panels, allowing for rapid installation by a minimal crew.  Sections can also be transported in boxes, depending on what is easiest and more economical to ship to the convention site.  It takes 1-2 people about 15 minutes to install a 10x20 trade show floor.

​

Modules connect in a matrix, creating a seamless plastic exhibit floor that is both attractive and safe for heavy traffic trade show booths.

​

Due to EverBlock’s unique connector design, flooring sections can be nudged by foot into their connection position and then snapped into place with a simple step.

​

To remove sections, simply lift EverBlock flooring sections up at a 45% angle, disengaging the trade show flooring panels for transport and further use.  

​

​

​

RUN POWER AND COMMUNICATIONS CABLES UNDERNEATH THE FLOOR

​

EverBlock snap together trade show flooring allows networking and power cables to be run underneath the floor, for computers, communications and other equipment.  

​

Run power anywhere required, including to lights. computers, TV's or other display components. 

​

​

​

ADD LED LIGHTS FOR DRAMATIC FLOORING EFFECTS

​

LED lighting strips can be threaded underneath trade show booth flooring to create illuminated booth floors. Standard LED sections are run within the integrated bi-directional cable channels that are standard on all EverBlock Floors.  There is sufficient space in the cable channel slots to allow both LED tape strips and power cables, if necessary. 

​

​

​

ALTERNATE COLORS AND STYLES TO CREATE BEAUTIFUL PATTERN AND DESIGNS

​

tilize the EverBlock LT to Create a Wood Grain or a Black or White finished look or Choose from our 16 standard colors to match corporate or exhibit themes.

  

Create checkerboard patterns, stripes, cubes, lines and other designs to compliment your trade show exhibit design or pick a neutral color so that the floor fades away. 

​

Utilize our unique 3D virtual builder to experiment with color, style, and patterns and to visualize and manipulate your floor until you achieve your exhibit flooring goals.

​

​

Choose from 16 Standard Colors:

​

​

​

​

​

​

​

​

​

 

TRANSITION EDGES FINISH YOUR FLOOR AND PROVIDES A SAFE TRANSITION FROM THE GROUND LEVEL BELOW

​

EverBlock transition edge pieces snap onto the ends of trade show flooring sections, providing a finished look and a gradual transition from the surface below. 

​

Edging is 6" wide and 12" long and comes in male, female and corner pieces.  All edging is black but can be run in custom colors for minimum order sizes. 

​

​

​

EVERBLOCK FLOORING WORKS WITH THE EVERBLOCK BUILDING BLOCKS, FORMING A COMPLETE EXHIBIT BUILDING SYSTEM

​

EverBlock exhibit flooring is part of the EverBlock Modular Building System and integrates with EverBlock building blocks to provide a complete exhibit building system.

​

EverBlock flooring sections feature optional connector lugs that snap onto the tops of flooring sections, providing the connection feature required to connect EverBlock building blocks solidly to the floor.  Connect lugs only to the flooring sections where blocks will be attached.

​

Construct walls, columns, display plinths, counters, doorways, desks, and shelving and connect everything to the flooring below to create a completely integrated trade show exhibit structure. 

​

For multi-level booth designs, you can raise EverBlock exhibit floor sections to create different height risers for raised display area, seating areas, pedestals and anywhere a raised display floor is needed.